Skip to content

Back to partners

Eberle Design (EDI)

Tacel supplies the EDI lineup of conflict monitors and serial interface units to Canadian agencies: MMU2-16LEip SmartMonitor for NEMA, CMU-2212 series for ATC cabinets, plus the SIU-2218 ITS Serial Interface Unit. Industry-standard fault detection for Canadian intersections.

About Eberle Design (EDI)

Eberle Design Inc. (EDI) is one of the most widely specified names in traffic signal monitoring. Its conflict monitors and malfunction management units (MMUs) continuously watch a signal cabinet for conflicting greens, voltage faults and other dangerous states, and put the intersection into flash if something is wrong, the safety device that stands between a controller fault and a hazardous indication.

Tacel supplies the EDI lineup to Canadian agencies, including the MMU2-16LEip SmartMonitor for NEMA cabinets, the CMU-2212 series for ATC cabinets, and the SIU-2218 ITS Serial Interface Unit. Every unit ships from a Canadian office, and our technicians help agencies select the right monitor for their cabinet type and program the permissive and channel settings so the device matches the intersection's signal plan.

Eberle Design (EDI) website(opens in a new tab)
Circuit boards from Eberle Design (EDI) traffic signal electronics

Why buy Eberle Design (EDI) from us

Buying EDI monitors through Tacel removes cross-border importing, customs paperwork and U.S. return-shipping: you order from a Canadian supplier, stock pulls from one of our four offices, and any RMA stays in Canada. Because a conflict monitor is a safety-critical device, our technicians help with selection and programming in the field, so the unit you install is configured correctly for your cabinet from the start.

  • Authorized Canadian distribution, so there is no cross-border importing to manage.
  • Stock at our four offices: Toronto, Montreal, Calgary and Burnaby.
  • Field service across Canada and commissioning support.
  • Over 45 years in Canadian ITS.

What we carry

Conflict MonitorsCabinet Monitor UnitsSerial Interface Units

Where it gets used

NEMA cabinet monitoring

The MMU2-16LEip SmartMonitor watches NEMA TS-2 cabinets for conflicts and faults and drops the intersection to flash on a detected failure, with Ethernet access for diagnostics.

ATC cabinet monitoring

The CMU-2212 series provides cabinet monitor unit functions for ATC cabinets, matching agencies that have standardized on the ATC platform.

ITS serial interfacing

The SIU-2218 Serial Interface Unit connects field I/O to the controller over the ITS cabinet serial bus, part of a standards-based cabinet architecture.

Common questions

Is Tacel an authorized EDI distributor in Canada?

Yes. Tacel supplies Eberle Design (EDI) conflict monitors and interface units to Canadian agencies, with stock and field support across its four offices. Every unit ships from a Canadian office, so there is no cross-border importing, customs paperwork or U.S. return-shipping, and any RMA stays in Canada.

Which EDI products does Tacel carry?

Tacel supplies the MMU2-16LEip SmartMonitor for NEMA, the CMU-2212 series for ATC cabinets, and the SIU-2218 ITS Serial Interface Unit, plus related modules. The MMU2-16LEip is a NEMA TS2-2016 malfunction management unit with an intersection status LCD and event logging; the range also includes the SSM-12LE NEMA TS-1 monitor and Oracle detectors.

Do you provide commissioning and support?

Yes. Tacel's technicians help with monitor selection, permissive and channel programming, and in-Canada warranty/RMA service for EDI units. Because a conflict monitor is a safety-critical device, each unit is configured from the start for its cabinet type and the intersection's signal plan.

Talk to us about Eberle Design (EDI)

Need EDI conflict monitoring for a Canadian agency project? Tacel ships from four offices.

Get in touch